Assa Abloy CL33700 TCPWI1 Instrukcja Użytkownika Pobierz pdf (Strona 33)

Copyright© 2009, 2014 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

Architectural Speciﬁcations

3.1 Access 700 PWI1 ED5000N Exit Devices

Intelligent WiFi Access Control Rim & Mortise Exit Devices

A. WiFi Access Control Rim & Mortise Exit Devices to be ED5000N Series as manufactured by

Corbin Russwin of Berlin, CT.

B. BHMA certiﬁed panic and exit device hardware conforming to ANSI 156.3, Grade 1 standard

and ANSI A117.1 accessibility guidelines. Electronic motorized locking control of lever handle

(solenoids not acceptable) contained completely within the body of the outside trim control.

U.L. listed and labeled for either panic or “Fire Exit Hardware” for use on up to 3 hour ﬁre rated

openings.

1. Mortise Exit Devices shall utilize a 3/4" anti-friction deadlocking latch and 1" case-

hardened steel deadbolt with a 2-3/4” Backset.

C. WiFi access control locking devices interface using ﬁeld replaceable IEEE 802.11 b/g/n, 2.4

GHz wireless radio connection to an Ethernet Local Area Network (LAN) facilitating centralized

control via a Software Development Kit (SDK). Locks will continue to operate independent of

Ethernet (LAN) wireless connection slowdown or failure.

1. Provide access control products with non-volatile memory.

D. Supports WEP, WPA, WPA2 and 802.1x wireless encryption (IEEE 802.11 b/g/n, 2.4 GHz). AES

128 encrypted communication between IP Enabled lock and electronic access control system

platform via SDK. Programmable time zone periods, blocked holidays, automatic unlock with

or without ﬁrst entry, minimum of 2,400 user codes and the ability to audit the last 10,000

transactions (event type, date, time, user ID and name). Distributed intelligence allows stand

alone functional operation of lock in absence of network communication or slowdown allowing

for system operational redundancy.

E. Integrated reader supports High Coercivity (HiCo) magnetic swipe credentials, HID

125 kHz

proximity credentials or ISO 14443 A/B and ISO 15693 13.56 MHz contactless credentials:

HID

iCLASS / iCLASS SE (full authentication, all formats), MIFARE Classic and DESFire EV1 (full

authentication, all formats); NFC (Near Field Communications) and HID

SIO-Enabled™.

1. Valid/ Invalid credential presentation viewable by means of LED indicators on outside

escutcheon.

2. Dual factor keypad authentication function optional.

F. Environmental Conditions: Conformally coated weather resistant electronic controller shall meet

the following minimum requirements:

1. Operating temperature: -13°F (-25°C) to 151°F (66°C)

2. Operating humidity: < 85% non-condensing

3. Weatherized design suitable to withstand harsh environments with a certiﬁed rating of IP55

G. Conﬁguration: Programming of time zone periods, blocked holidays, automatic unlock with or

without ﬁrst entry, and listing 10,000 event transaction history consisting of event type, date,

time, user ID and name is required.

1. Provide network and lock conﬁguration CD tool kit for initial lock set-up and programming

via USB connection.

H. Monitoring: Software accessible monitoring (via SDK) of inside push rail (Request-to-Exit),

integral door position switch (DPS) integral to the lock (door open/closed status), forced door,

unknown card, door held open, battery and tamper.

1. Standard privacy function initiated from push button on inside escutcheon and cancelled

upon activation of valid Request-To-Exit (REX) or user deﬁned credentials.

a. Activation of privacy function is indicated by LED notiﬁcation on inside escutcheon.

b. Redundant actuation of privacy button does not deactivate privacy mode.

I. Emergency override access capability by mechanical key cylinder retraction of lock latch bolt

without electronic activation necessary.

1. Provide keyed cylinder dogging feature for non-rated panic devices and keyed removable

mullions as speciﬁed.

J. Inside push bar retracts latch bolt for free egress.

K. Power Source: Powered by 6 AA alkaline batteries with LED indication of locked, programming

mode and low capacity warning status conditions.

1. Optional hard power by means of 12-24 VDC power supply.

L. Cylinders: Reference 2.04 Keying for keying requirements

1 2 ... 28 29 30 31 32 33 34 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Assa Abloy CL33700 TCPWI1 Instrukcja Użytkownika Strona 33

Komentarze do niniejszej Instrukcji