Assa Abloy DK-26 Instrukcja Użytkownika Pobierz pdf (Strona 3)

An ASSA ABLOY Group company

The DK-26SS shown with optional spy shield. Both the keypad and spy shield are avail-

able in satin stainless and black finishes.

DK-16: WHERE SINGLE GANG

MOUNTING IS PREFERRED

TECHNICAL DATA KEYPADS

CPU

For indoor applications which re-

quire the power and security of the DK-

26, but which are more suited to a single

gang plate to mount the keypad, the DK-

16 combines the pad of the DK-11 with the

separate CPU board of the DK-26. Opera-

tion is the same as with the DK-26.

DK-26

Dimensions: 1-1/2” x 7” x 1” 38mm x 178mm x 25.4mm

Finish: Satin stainless (DK-26SS) or Black (DK-26BK)

Cable: 16 foot, 12 conductor, 22 gauge

Operating Environment: Outdoor or indoor use

Operating Temperature: -22

F to +158

F -30

C to +70

Visual / Audible Indicators: Three LED’s and a beeper

Construction: Case stainless steel with 11 EPDM rubber keys (10 digits

and bell key)

DK-16

Size: Single Gang

Finish: Satin stainless plate, white keys with black lettering on a

black surface

Cable: 16 foot, 12 conductor, 22 gauge

Operating Environment: Indoor use. Outdoor weather resistant with

weather cover. (See DK-11)

Visual / Audible Indicators: Three LED’s and a beeper

Construction: Stainless steel backplate with 12 keys (10 digits and “*”

and “#” keys.

Dimensions

Enclosure: 6” x 8” x 2-7/8” 152.5 x 203 x 73mm

CPU Board: 4” x 6” (approx.) 101.5 x 152.5mm

Current Draw:Rest, 7 mA @ 12V 20 mA @ 24V

Maximum:160mA@ 12V 190 mA @ 24V

Power Input: 12 to 24 volts AC or DC

Auxiliary Power: Provides rectified DC power for electric lock or AC

input. 2 A maximum.

Relay: DPDT, 5 A maximum

Operating Temperature: +32

F to +158

F 0

C to +70

DK-26SS Complete unit in satin

DK-26BK stainless finish or black

DK-26SSXB Expanded system with keypad

DK-26BKXB in stainless or black finish

DK-26PSS Keypad only, satin stainless

DK-26PBK or black finish

DK-16 Complete unit with single gang keypad

DK-16XB Expanded system with keypad only, single gang

DK-16P Keypad only, single gang

DK-SSS DK-26 Spy Shield in satin

DK-SBK stainless or black finish

DIGITAL ENTRY SYSTEMS

a card and a PIN code. The Weigand version of the DK-11 (DK-11W) is

a one-piece, fully integrated unit. With the DK-26/16 keypad, an exter-

nal board is used to generate the Weigand data stream and it my be

purchased individually or together with the associated pad.

DK-16

DK-11: SIMPLE YET POWERFUL

THE DK-11 is a one piece unit intended for lower security re-

quirements. It is furnished on a single gang brushed stainless steel

plate with retrofit backbox. The keypad provides true 10 digit opera-

tion and includes red and green signaling LED’s. The unit runs on 12 or

24 VDC power and control output is via an integral 5 Amp SPDT relay

for operating fail safe and fail secure locks. All wiring is to a terminal

strip found on the CPU board directly behind the plate. While primarily

intended for indoor operation, an optional rain cover allows reliable

use for exterior areas not exposed to direct rain. The pad itself is a U.S.

made, high-volume unit with engraved, paint-filled keys.

POWER AND FLEXIBILITY

The DK-11 accepts a program

code and 4 user codes from 2 to 7 digits

so that different user groups can have

their own code. Changing any user code

is easily done by entering the program

code (5 to 7 digits) first. Lock release time

is also programmed from the keypad from

1-99 seconds. Selectable toggle mode en-

ergizes the relay when a valid code is en-

tered and deenergizes it when a code is

entered again. The DK-11 also has a REX

(request to exit) input. This allows an ex-

ternal remote switch to trigger the unit just

as if a code was entered. All codes are

stored in non-volatile memory so that they

are retained in a power failure. Finally, an alarm function locks out the

keypad for 30 seconds after 16 wrong digits have been entered. The

DK-11 delivers amazing capability in a compact, inexpensive package.

The DK-11 and DK-16 keypads are provided

with both flush mount and surface mounted back boxes.

DK-11 CPU

ORDERING INFORMATION

1 2 3 4

DIGITAL ENTRY SYSTEMS 1

Komentarze do niniejszej Instrukcji

Brak uwag

Assa Abloy DK-26 Instrukcja Użytkownika Strona 3

Komentarze do niniejszej Instrukcji